Warm white is usually 1800 K to 3000 K. What you showed is less Kelvin than the color temperature of fire (1500 K). We don’t have a color temperature word for that, but “red” works. Of course, such light has no blue component (helps control the cicardian cycle) and is pretty much monochromatic with CRI of <5.
I’m not saying it’s a bad idea, I have a red bulb too. It’s “handmade” by removing thick red rubber from a “golf ball” decorative 7W CFL and stretching it over a similarly-sized 6W 2700K LED that has instant start and higher light output (not to mention, the taut rubber won’t send glass ball shards into a mercury-vapor-filled tube if it happens to fall). It is not as monochromatic as pure red LEDs, I think it’s close to what the phosphor-based red ones emit (with a lower efficiency of course since I discard the blue and green while they turn almost all blue into red and no green) and those are marketed as cicardian too. I have to avoid looking straight into it though: the pupil is wide open because rods don’t react strongly to red light so long-wavelength (red) cones get massively overloaded and I see a green spot for a while.
I use red bulb (or just leds now) unironically, I can see good enough to walk at night and they don’t fucking hurt my eyes like dumbass white bulbs. Seriously how do people use those white bulbs? Just going to a hospital is painful.
The paint in my living room looks diarrhea brown and corpse gray under warm light. It’s purple and blue, and there are a lot of windows so I can’t plan for warm light as a default like I can in bedrooms. Daylight bulbs keep the color what it should be.
The center is 3000K tho
Used 5000K because it is missing from OP’s post for some reason.
Warm white is usually 1800 K to 3000 K. What you showed is less Kelvin than the color temperature of fire (1500 K). We don’t have a color temperature word for that, but “red” works. Of course, such light has no blue component (helps control the cicardian cycle) and is pretty much monochromatic with CRI of <5.
Personally though, something under 1500K is perfect for me as bedtime approaches. It primes me to fall asleep quickly
I’m not saying it’s a bad idea, I have a red bulb too. It’s “handmade” by removing thick red rubber from a “golf ball” decorative 7W CFL and stretching it over a similarly-sized 6W 2700K LED that has instant start and higher light output (not to mention, the taut rubber won’t send glass ball shards into a mercury-vapor-filled tube if it happens to fall). It is not as monochromatic as pure red LEDs, I think it’s close to what the phosphor-based red ones emit (with a lower efficiency of course since I discard the blue and green while they turn almost all blue into red and no green) and those are marketed as cicardian too. I have to avoid looking straight into it though: the pupil is wide open because rods don’t react strongly to red light so long-wavelength (red) cones get massively overloaded and I see a green spot for a while.
I use red bulb (or just leds now) unironically, I can see good enough to walk at night and they don’t fucking hurt my eyes like dumbass white bulbs. Seriously how do people use those white bulbs? Just going to a hospital is painful.
This is why I don’t use them.
The paint in my living room looks diarrhea brown and corpse gray under warm light. It’s purple and blue, and there are a lot of windows so I can’t plan for warm light as a default like I can in bedrooms. Daylight bulbs keep the color what it should be.