I was working at a company, where many employees at the office whined about temperature of their rooms, so I finally decided to put every room a controller and tucked the cable away somewhere under the skirting board or something. The controller wasn’t working, but everyone was able to set it to their preferred temperature, and the complaints stopped.
How did you provide the necessary 24V power to these?
E: Oh nvm, you made this up
E2: you also did not run any cables under a skirting board or “something” because if this actually happened it was you who attached the wires… because thermostats only come with bare terminals as the signaling wires and power wires are snaked through the walls and connected to the furnace or controller. If your story is to be believed, you went out and bought a bunch of thermostats, then went out and bought a bunch of random wires to connect to them. (This should also cover your anticipated lie that they were not digital).
E3: the notion that you would have an adjustable temperature setting, while the thermostat ALSO displays the present room temperature, and you just glossing past the idea that nobody’s going to notice. Additionally, the idea that some busybody is going to allow them to sit there with nothing said is sheer madness. It’s almost like you’ve never had a job in a real office.
I fucking cannot stand people like you. Stop making up BS because you’re lonely.
Just playing devil’s advocate, but if the story is old enough then they could’ve been rotary style, and they pulled a wire to sell the effect (I’ve done the same thing with fake surveillance cameras).
In the 80s and 90s, thermostats had physical dials and mechanical temperature metres that did not require power. They only had two terminals for sending a signal to the controller of the furnace.
This is one. They were everywhere until the mid to late 2000s.
This is the thing. I have also made same with fake surveillance cameras too. I didn’t think there’s some so young person who didn’t know rotary style regulators.
while the thermostat ALSO displays the present room temperature, and you just glossing past the idea that nobody’s going to notice.
Thing is, that idea only pops up in your post. @Krudler@lemmy.world doesn’t say anywhere in their post that people could see the current temperature, just that they stopped complaining once they had a control they could set to the temperature they wanted. That’s how most thermostats worked back in the day. There was no “It’s currently 62.5°F” display in action. If you felt hot, you set the thermostat to a lower temp. If you felt cold, you did the opposite.
That’s ok. You can believe whatever you like. This happened over ten years ago. Shit, almost twenty years ago.
I have 43 years of experience in this field. If you don’t believe me, that’s ok for me, I can live with that. I hope you enjoy your life and have a nice day.
Sure sure. Relax and take a deep breath, we all know you’re the only one knowing everything. You’re the chief, I can’t compete with your wisdom. Peace.
I was working at a company, where many employees at the office whined about temperature of their rooms, so I finally decided to put every room a controller and tucked the cable away somewhere under the skirting board or something. The controller wasn’t working, but everyone was able to set it to their preferred temperature, and the complaints stopped.
How did you provide the necessary 24V power to these?
E: Oh nvm, you made this up
E2: you also did not run any cables under a skirting board or “something” because if this actually happened it was you who attached the wires… because thermostats only come with bare terminals as the signaling wires and power wires are snaked through the walls and connected to the furnace or controller. If your story is to be believed, you went out and bought a bunch of thermostats, then went out and bought a bunch of random wires to connect to them. (This should also cover your anticipated lie that they were not digital).
E3: the notion that you would have an adjustable temperature setting, while the thermostat ALSO displays the present room temperature, and you just glossing past the idea that nobody’s going to notice. Additionally, the idea that some busybody is going to allow them to sit there with nothing said is sheer madness. It’s almost like you’ve never had a job in a real office.
I fucking cannot stand people like you. Stop making up BS because you’re lonely.
Just playing devil’s advocate, but if the story is old enough then they could’ve been rotary style, and they pulled a wire to sell the effect (I’ve done the same thing with fake surveillance cameras).
Exactly…you don’t need to supply 24vdc if there’s no display to power, just a dial that does nothing but satisfies the user.
I covered that possible lie in my expansive bullshit call out. You either did not read or you do not understand.
Go check it out, you might come to believe that I’ve installed maybe a hundred of these and actually know what I’m talking about.
How old are you?
In the 80s and 90s, thermostats had physical dials and mechanical temperature metres that did not require power. They only had two terminals for sending a signal to the controller of the furnace.
This is one. They were everywhere until the mid to late 2000s.
https://www.ebay.com/itm/168792921855?_skw=vintage+thermostats&itmmeta=01M514T246XJDF5H4WFN95E4RC&itmprp=enc%3AAQALAAAA8LMoA3ATICNpdlejoNWn7EezK5ZxAKW7tSATJgJx%2F6H0mD4oKHO1pSLMuM11igxCTPC1IUSE6bMW%2F8SYPHbRWdMjO4hY8Mlc4gX1Bk0TN9KJLNzmKRf32UREURMJwMgwoHapUGrCtpVJNXQDg%2BxS%2Blvqt2JzwANzqAclKOChcGTvtVA%2FN7YP22xreS5NtMmfzEMzE6OQnzhRQgG9b%2FQll4Uezp5J%2BX7zTKprWaj%2Bk6MhdkuM2590Cz6zryT7ZdSA2XWtzJLbx1W5E7WVhd5LKb9jvo2txTWAQyEGA7d5Eg8mZSVmML3%2FVW%2FmpWxoZyvRMQ%3D%3D|tkp%3ABk9SR7Si6KSoaA
This is the thing. I have also made same with fake surveillance cameras too. I didn’t think there’s some so young person who didn’t know rotary style regulators.
I already covered that bullshit possibility in my calling out
Thing is, that idea only pops up in your post. @Krudler@lemmy.world doesn’t say anywhere in their post that people could see the current temperature, just that they stopped complaining once they had a control they could set to the temperature they wanted. That’s how most thermostats worked back in the day. There was no “It’s currently 62.5°F” display in action. If you felt hot, you set the thermostat to a lower temp. If you felt cold, you did the opposite.
Yeah I was thinking the same thing hahahaha
deleted by creator
That’s ok. You can believe whatever you like. This happened over ten years ago. Shit, almost twenty years ago. I have 43 years of experience in this field. If you don’t believe me, that’s ok for me, I can live with that. I hope you enjoy your life and have a nice day.
You’re full of shit, I did maintenance for a decade.
I don’t know why people like you are so sad that you need to make shit up.
You obviously don’t know anything, because you could have cooked up a much better story, I explained in full why you cannot be telling the truth.
Sure sure. Relax and take a deep breath, we all know you’re the only one knowing everything. You’re the chief, I can’t compete with your wisdom. Peace.